BOLE EKS SERIES
EK-SERIES HYDRAULIC SERVO MOTOR ENERGY SAVING
With an R&D team of 60 engineers, BOLE Machinery spent three years in the development of the EK Series machines which first launched in 2008.
In 2010, the third generation super energy-saving servo motor EK Series was introduced to offer greater cost effectiveness, along with an array of technological innovations. In 2016 BOLE introduced the EK II to the EK Series.
Continuing its push toward excellence and precision technology, in 2018 BOLE introduced the EK-S Series to the market offering high efficiency and low energy consumption. With over 60 technical innovations combined with the use of Servo Driven Motors, BOLE offers high-efficiency and low energy consumption. Featuring BOLE’s innovative patented Central Clamping System (CCS) technology, these highly successful EK Series injection molding machines have captured the attention of the injection molding world.
Key Features
- FLOATING TIE BARS
- SERVO DRIVEN MOTORS
- EFFICIENCY
Central Clamping Structure
- Eliminates external bending and keeps the force parallel: protects moulds and improves accuracy. The forces work parallel to the centre of the mould:
- Avoiding product flash when small moulds are used in large machines.
- Reduces Tonnage required (tonnage loss due to deflection), this in turn reduces the load on the pump, and therefore achieves better energy savings.
- Completely overcomes the deformation of platens due to the balanced forces.
- Ejector Stroke is not limited by toggles, easier for installation and maintenance.
- Opening stroke increased by 10-20%+
For more information on our range of Servo-Driven Injection Molding Machines, contact us on (330) 983-4700 or email us
EKS Core Advantages
Saving Less Flashes, Save Labor Cost, Material, Fast Plasticize Saving Time and Operation Cost. | Accuracy Open-Close Repeat Position: ±0.5mm. Product Weight Deviation: ≤0.3%. | ||
Stable Full Series Optimized, Mechanical Strength and Accuracy Reach Advanced Level In The Industry. | Intelligent Reserved Industrial 4.0 Expansion Interface For Certain Needs. |
Build configuration for USA
Standard EKS Servo Driven machines
SERIES | MAIN PARTS | BRAND | MANUFACTURED COUNTRY |
|---|---|---|---|
1 | Controller | KEBA | AUSTRIA |
2 | Servo System | INOVANCE/SYNMOT | CHINA |
3 | Servo Driver | INOVANCE/SYNMOT | CHINA |
4 | Transducer | OPKON/GEFRAN | TURKEY/ITALY |
5 | Air Break Switch | LS/ABB | KOREA/SWISS |
6 | AC Contactor | SCHNEIDER/FUSHI/EATON | GERMANY/JAPAN/AMERICA |
7 | MCB | SCHNEIDER/EATON | GERMANY/AMERICA |
8 | Solid State Relay | THE/CRYDOM | CHINA/AMERICA |
9 | Safety Relay | PHOENIX/WIELAND | GERMANY |
10 | Limit Switch | SCHMERSAL/OMRON | CHINA/JAPAN |
11 | Approach Switch Square | SCHNEIDER | GERMANY |
12 | Approach Switch Round | SCHNEIDER | GERMANY |
13 | Material Electric Eye | SCHNEIDER | GERMANY |
14 | Oil Pump | HYTEK/SUMITOMO/DENISON | CHINA/JAPAN/AMERICA |
15 | Charging Motor | STF | CHINA |
16 | Mould Adjust Motor | EATON | AMERICA |
17 | Charging Bearing | LYC/HRB/ZWZ | CHINA |
18 | Oil Seal | HALLITE/NOK/PARKER/SKF | UK/JAPAN/AMERICA/SWEDEN |
19 | Direction Valve | TOKYO KEIKI | JAPAN |
20 | Hydraulic Valve | HNC | TAIWAN |
21 | Back Pressure Valve | HNC | TAIWAN |
22 | Lubrication Pump | HERG | CHINA/JAPAN |
23 | High Pressure Oil Hose | MANULI/ALFAGOMMA/EATON | ITALY/AMERICA |
24 | Pressure Gauge | TECSIS | GERMANY |
25 | Oil Cooler | BAIYI/HEMING | CHINA |
The world’s well-known brands trust BOLE
 |  |  |  |  |  |
Copyright 2020 BOLE America
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES AND/OR IMPROVEMENTS IN DESIGNS & DIMENSIONS WITHOUT PRIOR NOTICE AND WITHOUT INCURRING ANY OBLIGATION.